Plastic injection
molding is a method of plastic products, using the pressure of the molten
plastic injected into the mold of plastic products, and cooling molding to
obtain the desired variety of plastic parts. Specialized machinery for
injection molding injection molding machine
Plastic Injection mold
The mold is obtained
after the resin material is injected into a metal mold apparatus of the
products having a certain shape. Although not indicated in the drawings, in
fact, in order to control the temperature of the mold, on the mold so that
refrigerant (warm water or oil) through the cooling holes, such as a heater means.
Melt the material has become the mainstream Road, injected into the cavity
through the shunt, the gate. After cooling stage to open the top of the mold,
molding machine the top of the device will be the peak of the staff, the
product launch.
The resulting shape
is often the final product in the installation or as a final product before use
is no longer the need for other processing. Lot of detail, such as the convex
portion, the ribs, threads, can be molded in the operation of the injection
molding step.
Plastic Injection molding machine
Plastic Injection molding is the heat to melt the material by a
high pressure enters the mold cavity, after cooled and solidified to obtain a
molded article. The plastic injection molding process can be divided into the
following six stages clamping, injection, packing, cooling, mold products
remove.
The plastic injection
molding machine has two basic components: the injection means and a mold
clamping device for melting and feeding the plastic into the mold. The role of
the mold clamping device in that: the mold under the live injection pressure
case closed. Remove the article to the injection apparatus in the plastic
injection mold prior to its melting and then control the pressure and velocity
of the melt is injected into the mold. The two designs: the screw
preplasticator or dual-level device, as well as reciprocating screw injection
device. The screw preplasticator pre-plasticizing screw (first-class) and then
melt the plastic injection material rod (second-class).
Plastic material
What are the types of
plastic injection molding? Many different types of plastic, generally divided
into thermoplastic and thermosetting plastics, thermoplastics after when heat
softened or melted knot hard after cooling, again antipyretic still softened or
melted. Is a kind of plastic, polystyrene (PS) (applied to transparent products
and foam, etc.), polyvinyl chloride (PVC) (used in building pipe, etc.),
polyethylene (PE) (used in day-to-day supplies more), polypropylene (PP)
(applies to repeatedly force the product), acrylonitrile butadiene styrene
(ABS) (uses extensively), polycarbonate (PC) (commonly known as the
bullet-proof glass, widely used require high impact strength of the transparent
product); poly phthalazine amine (PA) (used in self-lubricating property
parts); poly of formaldehyde (POW (like PA); polytetrafluoroethylene (PTFE) (
applied the anti-corrosion products). thermoplastics with high production efficiency,
good mechanical properties and dielectric properties of the advantages of lower
heat resistance and stiffness, and some have reached new thermoplastic
thermosetting plastic heat resistance.
SINO MOULD is one of the most
famous plastic injection mould manufacturers in China, we could offer you best
quality plastic injection mould and also provide part production service for
you.
SINO MOULD has over
20 sets plastic injection molding machine from 188T to 1800T in our workshop,
we use this machine to test our mould and also provide part production for our
customer. With more than 3 years production experiences, we have gained below
results which may be useful for some readers.
0 comments:
Post a Comment